Communicate with Supplier? Supplier
Alley Wang Ms. Alley Wang
What can I do for you?
Contact Supplier

Shijiazhuang BKDR Metallurgical Science & Technology Co.,Ltd

Anti Wear And Low Corrossion - manufacturer, factory, supplier from China

(Total 24 Products for Anti Wear And Low Corrossion)

  • HiCr Wear Resistant blocks and plates

    HiCr Wear Resistant blocks and plates

    • Brand: BKDR

    • Packaging: Adapt to the shipment method either by sea or by air.

    • Supply Ability: >1000Ton

    • Min. Order: 1 Piece/Pieces

    HiCr white iron pipes or plates can be used to transfer the Oilsand the seawater or the sewage which can be used in the power plant the Oil Gas the metallurgy and naval

    Contact Now

  • Hi Chrome Wear Resistant Chocolate blocks and plates

    Hi Chrome Wear Resistant Chocolate blocks and plates

    • Brand: BKDR

    • Packaging: Adapt to the shipment method either by sea or by air.

    • Supply Ability: >1000Ton

    • Min. Order: 1 Piece/Pieces

    Advantages 1 High Hardness 63HRC 700BHN According to the feedback from our end users the usage life is at least 2 times higher compared with overlay hardfacing wear plates at least 7 times longer than A R type steels 360 400 BHN The thicker ones such as 20mm or above wear plates usage life is much more longer The wear...

    Contact Now

  • HiCr Wear Resistant PipeTube

    HiCr Wear Resistant PipeTube

    • Brand: BKDR

    • Packaging: Adapt to the shipment method either by sea or by air.

    • Supply Ability: >1000Ton

    • Min. Order: 1 Piece/Pieces

    Advantages 1 High Hardness 63HRC 700BHN According to the feedback from our end users the usage life is at least 2 times higher compared with overlay hardfacing wear plates at least 7 times longer than A R type steels 360 400 BHN The thicker ones such as 20mm or above wear plates usage life is much more longer The wear...

    Contact Now

  • HiCr Wear Resistant Pipe

    HiCr Wear Resistant Pipe

    • Brand: BKDR

    • Packaging: Adapt to the shipment method either by sea or by air.

    • Supply Ability: >1000Ton

    • Min. Order: 1 Piece/Pieces

    Advantages 1 High Hardness 63HRC 700BHN According to the feedback from our end users the usage life is at least 2 times higher compared with overlay hardfacing wear plates at least 7 times longer than A R type steels 360 400 BHN The thicker ones such as 20mm or above wear plates usage life is much more longer The wear...

    Contact Now

  • Sand Dredge Centrifugal Slurry Pump

    Sand Dredge Centrifugal Slurry Pump

    • Min. Order: 1 Bag/Bags

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: G (GH)

    • Place of Origin: Shijiazhuang,China

    The sand and gravel slurry pump suit for dredging project Good design of impeller make the gravel pumps can transfer the high temperature slurry This type slurry pump is well know by the client as sand gravel pump or cerntrifugal gravel pump Our products can compete with the warman gravel pump in the field of property...

    Contact Now

  • Gold Sand Suction Pump

    Gold Sand Suction Pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: G (GH)

    • Place of Origin: Shijiazhuang,China

    Gold Sand Suction Pump are the single casing construction and connected by means of clamp hands single stage and suction the Gold Sand Pump and Gold Mining Pump have the advantage of light weight good cavitation resistive property easy install and maintain Sand Dredge Pump can continuous handling and transfer the most...

    Contact Now

  • Sand and gravel slurry pump

    Sand and gravel slurry pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: 8/6E-G

    • Place of Origin: Shijiazhuang,China

    Sand and gravel slurry pump mainly used in dredger dredging river channel mining and metal smelting blasting slag transportation etc Sand and gravel slurry pump Uses a single pump shell structure to connect the cassette the flow passage is spacious lined with hard alloy has good wear resistance corrosion resistance...

    Contact Now

  • Low Silicon Nodularizer

    Low Silicon Nodularizer

    • Packaging: 1mt big bag

    • Supply Ability: 1000mt/month

    • Min. Order: 5 Metric Ton

    • Certificate: ISO 9001:2008

    Low Silicon Nodularizer is usually used together with normal rare earth Ferro Silicon Magnesium nodularizer after mixed the Silicon content of final Dodularizer will be between 15 25 Suggest to mix the 50 of Low silicon nodularizer and 50 normal nodularizer for use or mix 1 3 Low silicon nodularizer and 2 3 normal...

    Contact Now

  • Low Slicon Nodularizer

    Low Slicon Nodularizer

    • Packaging: 1 MT big bag/ 25kg bags into big bag

    • Supply Ability: 1000T/month

    • Min. Order: 1T Bag/Bags

    • Certificate: ISO9001:2008

    Low Silicon Nodularizer The production of ductile iron with low overall yield will lead to overstock of foundry returns using low silicon nodularizer can increase the recycling ratio of foundry returns thus can reduce the ratio of new pig iron steel scrap and the production cost adopting low silicon nodulizer is a...

    Contact Now

  • Low Ti Ferro Chromium

    Low Ti Ferro Chromium

    • Brand: BKDR

    • Packaging: 1mt big bag

    • Supply Ability: 2000mt/month

    • Min. Order: 25 Metric Ton

    Low Ti High Carbon Ferro Chromium 1 Characteristic Ferrochromium is the alloy of chromium and iron and is hard and brittle According to the carbon content it is divided high carbon ferrochromium 4 0 9 0 medium carbon ferrochromium 1 0 4 0 low carbon ferrochromium 0 2 1 and micro carbon ferrochromium carbon less than0...

    Contact Now

  • Low/Micro Carbon Ferro Chromium

    Low/Micro Carbon Ferro Chromium

    • Brand: BKDR

    • Packaging: 1mt big bag

    • Supply Ability: 2000mt/month

    • Min. Order: 25 Metric Ton

    Low carbon ferrochromium 1 Characteristic Ferrochromium is the alloy of chromium and iron and is hard and brittle According to the carbon content it is divided high carbon ferrochromium 4 0 9 0 medium carbon ferrochromium 1 0 4 0 low carbon ferrochromium 0 2 1 and micro carbon ferrochromium carbon less than0 15 2...

    Contact Now

  • Low Si High Carbon Ferro Chromium

    Low Si High Carbon Ferro Chromium

    • Brand: BKDR

    • Packaging: 1mt big bag

    • Supply Ability: 2000mt/month

    • Min. Order: 25 Metric Ton

    Low Silicon High Carbon Ferro Chromium 1 Characteristic Ferrochromium is the alloy of chromium and iron and is hard and brittle According to the carbon content it is divided high carbon ferrochromium 4 0 9 0 medium carbon ferrochromium 1 0 4 0 low carbon ferrochromium 0 2 1 and micro carbon ferrochromium carbon less...

    Contact Now

  • Low Silicon Content Nodulizer

    Low Silicon Content Nodulizer

    • Packaging: 1mt big bag

    • Supply Ability: 1000mt/month

    • Min. Order: 5 Metric Ton

    • Certificate: ISO 9001:2008

    Under the premise of constant inoculation quantity if use this Low Silicon Nodulizer the foundry returns of high Silicon ductile iron can be use 80 or more in the production ductile iron this can completely eliminate the problem of foundry returns overstocking and improve properties of castings reduce casting costs Mg...

    Contact Now

  • Wire and Bar Mill Intermediate Rolls

    Wire and Bar Mill Intermediate Rolls

    • Brand: Zhengkun

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 1000mt/month

    • Min. Order: 2 Piece/Pieces

    The Wire and Bar Intermediate Rolls s body hardness is very high Hardness drops little from the surface to the center When the roll use in the Wire and Bar rolls mill it has good wear resistance tensile strength and can meet the requirement Material Adamite Rolls Graphite Steel Rolls Nodular Cast Iron Rolls Our...

    Contact Now

  • Wire and Bar Mill Roughing Rolls

    Wire and Bar Mill Roughing Rolls

    • Brand: Zhengkun

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 1000mt/month

    • Min. Order: 2 Piece/Pieces

    Wire and Bar Mill Roughing Rolls has a good tensile strength and toughness crack resistance and better anti breaking performance good biting performance The Roughing rolls can use under the condition of high rolling temperature and big rolling pressure Material Adamite Rolls Graphite Steel Rolls Nodular Cast Iron...

    Contact Now

  • Wire and Bar Mill Finishing Rolls

    Wire and Bar Mill Finishing Rolls

    • Brand: Zhengkun

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 1000mt/month

    • Min. Order: 2 Piece/Pieces

    Wire and Bar Rolling Mill Finishing Rolls should have a good wear resistance performance and resistance to crack pieces off Effectively guarantee the rolled surface finish and negative tolerances of rolling With a high wear resistant properties and anti crack anti peeling anti prints capacity These types of roll...

    Contact Now

  • Low Abrasive Slurry pump

    Low Abrasive Slurry pump

    • Min. Order: 1 Set/Sets

    • Model No.: LS series

    • Transportation: Ocean

    The Low abrasive Slurry Pump adopts packing seal impeller seal and assembly type mechanical seal to meet the requirements of different working conditions Cylinder bearing components are designed with high capacity bearings The bearings are lubricated by grease and oil to adapt to different operating conditions too...

    Contact Now

  • Bi-Metallic Composite Wear-Resistant Tubes

    Bi-Metallic Composite Wear-Resistant Tubes

    • Brand: BKDR

    • Packaging: Adapt to sea packing

    • Supply Ability: 1000t/m

    • Min. Order: 1 Piece/Pieces

    The product is made of HCWI and produced by advanced centrifugal casting technology which Ensures High Ductility and High Hardness Up To 63HRC with Smooth Even Inner Surface The Bi Metallic Or Multi Metallic Composite products can be shaped to straight ones elbow ones T type or others All of the wear parts are...

    Contact Now

  • Ferro Silicon Powder and Grain

    Ferro Silicon Powder and Grain

    • Packaging: 1mt big bag

    • Supply Ability: 2000mt/month

    • Min. Order: 25 Metric Ton

    • Certificate: ISO 9001:2008

    Ferro Silicon Powder The appearance of Ferro Silicon is the grey lumpish solid It has very great stablities and does not take place any chemical reaction in the dry air The melting point is 1290 1340 for Ferro Silicon with Si content 72 80 Ferro silicon is used extensively in the steel making casting non ferrous...

    Contact Now

  • Low Al Ferro Silicon

    Low Al Ferro Silicon

    • Packaging: 1mt big bag

    • Supply Ability: 2000mt/month

    • Min. Order: 25 Metric Ton

    • Certificate: ISO 9001:2008

    Low Aluminum Ferro Silicon Low Al Ferro Silicon is smelted by silicon coking coal and waste steel in electric resistance furnace with high temperature Low Al FeSi has a grey color with metal lustre and mainly used as deoxidizer and additive agent in steel making and casting industry Si Al C S P Ca 75 1 0 0

    Contact Now

  • Sand Suction Centrifugal Slurry Pump

    Sand Suction Centrifugal Slurry Pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: G (GH)

    • Place of Origin: Shijiazhuang,China

    Our sand suction pump is famous in China as the gold sand suction which use for the gold mining As this type pump continuous transfer the strong abrasive slurry it s work service life is short than other type pumps These pumps are construced of a single casing connected by means of clamps and a widened suction port it...

    Contact Now

  • Sand pump for gold mining

    Sand pump for gold mining

    • Min. Order: 1 Set/Sets

    • Model No.: G

    • Transportation: Ocean,Land

    We special design and manufacture this type sand pump for gold mining as the sand have the big abrasion property the common slurry pump s service life is very short it will affect the work efficency of suck sand of gold mining This type of sand pump at begining be test by the gold mining owner and it solve the problem...

    Contact Now

  • Low abbrasive ZJ Series Slurry Pumps

    Low abbrasive ZJ Series Slurry Pumps

    • Brand: Shengbo

    • Packaging: In Wooden Case adapt to sea shipment

    • Supply Ability: 100sets/month

    • Min. Order: 1-10 Set/Sets

    Low Abrasive Slurry Pump mainly used for transfering low density and low abrasive slurries for example Oxide skin in the steel plant coal ash water lime slurry waste water sludge etc The Low Abrasive slurry Pump adopts changeable liner can use abrasivemetal liner as well as rubber liner The impeller can also use...

    Contact Now

  • Type L low Abrasive Pump

    Type L low Abrasive Pump

    • Min. Order: 1 Bag/Bags

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: LS series

    • Place of Origin: Shijiazhuang,China

    Type L series centrifugal slurry pump use double pump casing structure and the inner lining is hard alloy or rubber with good wear resistance corrosion resistance and high reliability The product is reasonable in structure reliable in operation and long in service life It is especially suitable for low concentration...

    Contact Now

Review

Albert Lara

Jul 30, 2020 5

Thank you~
Tengku Afif Ashraf Tengku Asmat

Jul 22, 2020 5

Thank you.
Chirag Italiya

Jul 17, 2020 5

The Anti Wear And Low Corrossion is worth buying.
Just about every member from our large efficiency income crew values customers' wants and enterprise communication for Anti Wear And Low Corrossion , Anti-wear and Low Corrossion , hot and cold rolling , Our mission is to make it easier to generate long-lasting associations with your consumers by means of the power of marketing solutions.
continue on to further improve, to make sure product top quality in line with market and consumer standard requirements. Our firm has a excellent assurance program have already been established for Anti Wear And Low Corrossion , Anti-wear and Low Corrossion , hot and cold rolling , Our company sticks to the principle of "high quality reasonable price and timely delivery". We sincerely hope to establish good cooperative relationships with our new and old business partners from all parts of the world. We hope to work with you and serve you with our excellent goods and services. Welcome to join us!

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List