Communicate with Supplier? Supplier
Alley Wang Ms. Alley Wang
What can I do for you?
Chat Now Contact Supplier

Shijiazhuang BKDR Metallurgical Science & Technology Co.,Ltd

Ch E Diaphragm Pump Parts - manufacturer, factory, supplier from China

(Total 24 Products for Ch E Diaphragm Pump Parts)

  • Hi Chrome Cast Iron Rolls

    Hi Chrome Cast Iron Rolls

    • Brand: Zhengkun

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 1000mt/month

    • Min. Order: 5 Piece/Pieces

    High Chromium Rolls This type of rolls is High Chromium Centrifugal Duplex Rolls produced from high alloy material whose microstructure is bainite and chrome carbides the core of the rolls is filled with spheroidal graphite cast iron the carbide morphology in the outer microstructure is no longer M3C type but becomes...

    Contact Now

  • HCHSS ROLLS

    HCHSS ROLLS

    • Brand: Zhengkun

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 1000mt/month

    • Min. Order: 5 Piece/Pieces

    High Carbon Graphite High Speed Steel Rolls High Carbon Graphite High Spped Steel Rolling Rolls usually short as HCHSS Rolls Because of the advantages of excellent wear resistance good accident resistance and roll shape retention ability high speed steel roll has been widely used in the front stand of hot strip mill...

    Contact Now

  • Low/Micro carbon ferrochromium

    Low/Micro carbon ferrochromium

    • Brand: BKDR

    • Packaging: 1mt big bag

    • Supply Ability: 2000mt/month

    • Min. Order: 25 Metric Ton

    Low carbon ferrochromium 1 Characteristic Ferrochromium is the alloy of chromium and iron and is hard and brittle According to the carbon content it is divided high carbon ferrochromium 4 0 9 0 medium carbon ferrochromium 1 0 4 0 low carbon ferrochromium 0 2 1 and micro carbon ferrochromium carbon less than0 15 2...

    Contact Now

  • Enhanced Indefinite Chill Cast Iron Rolls

    Enhanced Indefinite Chill Cast Iron Rolls

    • Brand: Zhengkun

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 2000mt/month

    • Min. Order: 5 Piece/Pieces

    Enhanced Indefinite Chill Cast Iron Rolls The enhanced indefinite chilled cast iron roll is developed basing on the traditional ICDP By adding the element of V W Ti Nb the wear resistance of the En IDCP is improved carbide morphology and graphite can be refined and the microstructure changes little from inside to...

    Contact Now

  • High Chrome Cast Steel Rolls

    High Chrome Cast Steel Rolls

    • Brand: Zhengkun

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 1000mt/month

    • Min. Order: 5 Piece/Pieces

    High Chrome Cast Steel Rolls High Chromium Cast steel roll is manufacturerd with special process of triple casting and double duplex technology High chromium cast steel roll is characterized by high nipping capability high thermal resistance and high wear resistance The Barrel hardness is between 70 85 It is widely...

    Contact Now

  • High Chromium Iron Rolls

    High Chromium Iron Rolls

    • Brand: Zhengkun

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 1000mt/month

    • Min. Order: 5 Piece/Pieces

    High Chromium Rolls This type of rolls is High Chromium Centrifugal Duplex Rolls produced from high alloy material whose microstructure is bainite and chrome carbides the core of the rolls is filled with spheroidal graphite cast iron Application Work rolls Vertical Rolls Skin Pass Rolls for hot strip mills Chemical...

    Contact Now

  • Indefinite Chilled Cast Iron Rolls

    Indefinite Chilled Cast Iron Rolls

    • Brand: Zhengkun

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 1000mt/month

    • Min. Order: 5 Piece/Pieces

    Indefinite Chilled Cast Iron Rolls Alloy Indefinite Chilled Cast Iron Rolls is a cast iron with fine inter crystalline graphite evenly distributed throughout the working layer of roll barrel The addition of alloy elements such as Manganese Nickel Chromium and Molybdenum changes the matrix microstructure from pearlite...

    Contact Now

  • Clear Chilled Rolling Rolls

    Clear Chilled Rolling Rolls

    • Brand: Zhengkun

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 1000mt/month

    • Min. Order: 5 Piece/Pieces

    Clear Chilled Rolls Alloy chilled cast iron rolls are one kind of cast iron rolls which contain almost no free graphite in the matrix of working layer of the barrel They have hardness and excellent wearabillity are suitable to finish stands of light bar and wire rolling mills and narrow strip mills Its microstructure...

    Contact Now

  • High Chromium Iron Rolls

    High Chromium Iron Rolls

    • Brand: ZK

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 1000mt/month

    • Min. Order: 5 Piece/Pieces

    High Chromium Rolls This type of rolls is High Chromium Centrifugal Duplex Rolls produced from high alloy material whose microstructure is martensite and chrome carbides the core of the rolls is filled with spheroidal graphite cast iron Application Work rolls for hot strip mill finishing front stand Chemical...

    Contact Now

  • Indefinite Chill Double Pour Rolls

    Indefinite Chill Double Pour Rolls

    • Brand: Zhengkun

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 1000mt/month

    • Min. Order: 5 Piece/Pieces

    Alloy Indefinite Chilled Cast Iron Rolls has a long working life span Normally it s applied to intermediate and finishing stands of long products and flat products hot rolling mills Normally ICDP roll is added with chemical compositions like Cr Ni and Mo which may increase the work layer depth Thanks to the big qty of...

    Contact Now

  • high-chrome steel rolls used for hot-strip roughing mill

    high-chrome steel rolls used for hot-strip roughing mill

    • Packaging: On pallets

    • Supply Ability: 1000mt/month

    • Min. Order: 1 Piece/Pieces

    • Certificate: ISO 9001:2008

    We are specialized manufacturers of rolling rolls for more than 20 years The rolls cover the hot strip and plate mill rolls hot mill working rolls and hot mill back up rolls and so on We have a strong after sales service and technical support team Looking forward to cooperation with you Dia 500 1400mm Length 1000...

    Contact Now

  • Non Clogging Slurry Pump

    Non Clogging Slurry Pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Place of Origin: Shijiazhuang,China

    • Transportation: Ocean,Land,Air

    Non clogging pump have the good passing features it can transfer the medium with the long fiber it is wildly used in the industries of paper sugar and canned food industries Especially this type pump can transfer the medium of breweires and phosphorus chemical industry As the transfer medium and the design of pumps...

    Contact Now

  • Centrifugal Slurry Pump for Copper Mining

    Centrifugal Slurry Pump for Copper Mining

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: AH

    • Place of Origin: Shijiazhuang,China

    Centrifugal Slurry Pump for Copper Mining Copper Mining Slurry Pump is used to transport slurries of corrosive or high hardness solid particles in copper mining industry This kind of slurry pump adopts double Casing Structure have high efficiency wear resistant stable performance interchangeability of parts The lining...

    Contact Now

  • Middle/High Carbon Ferro Chromium

    Middle/High Carbon Ferro Chromium

    • Brand: BKDR

    • Packaging: 1mt big bag

    • Supply Ability: 2000mt/month

    • Min. Order: 25 Metric Ton

    High Middle carbon ferrochromium 1 Characteristic Ferrochromium is the alloy of chromium and iron and is hard and brittle According to the carbon content it is divided high carbon ferrochromium 4 0 9 0 medium carbon ferrochromium 1 0 4 0 low carbon ferrochromium 0 2 1 and micro carbon ferrochromium carbon less than0...

    Contact Now

  • Non-clogging Centrifugal Slurry Pump

    Non-clogging Centrifugal Slurry Pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Place of Origin: Shijiazhuang,China

    This type pump with CAD modern design super hydraulic performance high efficiency and lower abrasion rate can deliver sewage sea water bittern water and sludge It can apply at the situation with Non clogging requirements The excellent performance and high reliability reduce the client s daily maintaince cost The...

    Contact Now

  • Low Abrasive Slurry pump

    Low Abrasive Slurry pump

    • Min. Order: 1 Set/Sets

    • Model No.: LS series

    • Transportation: Ocean

    The Low abrasive Slurry Pump adopts packing seal impeller seal and assembly type mechanical seal to meet the requirements of different working conditions Cylinder bearing components are designed with high capacity bearings The bearings are lubricated by grease and oil to adapt to different operating conditions too...

    Contact Now

  • Desulfurization slurry pump (FGD)

    Desulfurization slurry pump (FGD)

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: TL (R)

    • Place of Origin: Shijiazhuang,China

    Series of TL FGD pump is a single stage single suction horizontal centrifugal pump It is mainly used as the circulating pump for absorbent tower in FGD appliances It has such features wide range flowing capacity high efficiency high saving power TL series pump is matched by tight structure X bracket which can save...

    Contact Now

  • Submersible Slurry Pump (SPR)

    Submersible Slurry Pump (SPR)

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: SPR

    • Place of Origin: Shijiazhuang,China

    Type SPR is elastomer protected suit for acid abrasive duty They are designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer Fully elastomer lined or hard metal fitted No submerged bearings or packing High capacity double suction design Optional...

    Contact Now

  • Submersible Centrifugal Slurry Pump

    Submersible Centrifugal Slurry Pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: SP

    • Place of Origin: Shijiazhuang,China

    Type SP pumps are vertical centrifugal slurry pumps submerged in sump to work submersible sludge pumps They are designed for delivering abrasive large particle and high density slurries submersible sludge pumps These pumps have no need of any shaft seal and sealing water They can also be operated normally for...

    Contact Now

  • Sand and gravel slurry pump

    Sand and gravel slurry pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: 8/6E-G

    • Place of Origin: Shijiazhuang,China

    Sand and gravel slurry pump mainly used in dredger dredging river channel mining and metal smelting blasting slag transportation etc Sand and gravel slurry pump Uses a single pump shell structure to connect the cassette the flow passage is spacious lined with hard alloy has good wear resistance corrosion resistance...

    Contact Now

  • Sand Suction Centrifugal Slurry Pump

    Sand Suction Centrifugal Slurry Pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: G (GH)

    • Place of Origin: Shijiazhuang,China

    Our sand suction pump is famous in China as the gold sand suction which use for the gold mining As this type pump continuous transfer the strong abrasive slurry it s work service life is short than other type pumps These pumps are construced of a single casing connected by means of clamps and a widened suction port it...

    Contact Now

  • High Head slurry pump

    High Head slurry pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Place of Origin: Shijiazhuang,China

    • Transportation: Ocean,Land

    High head centrifugal slurry pump mainly used for transfer middle level and low abrasive slurry this kind of type have a very high head can meet the requirement of long distance transportation HH Slurry pump have single case multilevel impeller horizontal version pump wet parts such as casing impeller liner plate in...

    Contact Now

  • Mechanical seal for slurry pump

    Mechanical seal for slurry pump

    • Min. Order: 1 Bag/Bags

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: Mechanical seal

    • Place of Origin: Shijiazhuang,China

    Mechanical seal It also be used for the application where leakage is not allowed The mechanical need the water cooler system to reduce the temperature during the working to protect the seal parts Meanwhile the mechanical seal the need the clear water as the washing water to take the dirty away to reduce the friction...

    Contact Now

  • Sand Dredge Centrifugal Slurry Pump

    Sand Dredge Centrifugal Slurry Pump

    • Min. Order: 1 Bag/Bags

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: G (GH)

    • Place of Origin: Shijiazhuang,China

    The sand and gravel slurry pump suit for dredging project Good design of impeller make the gravel pumps can transfer the high temperature slurry This type slurry pump is well know by the client as sand gravel pump or cerntrifugal gravel pump Our products can compete with the warman gravel pump in the field of property...

    Contact Now

Review

John Anyanwu

Nov 29, 2019 5

Well packing, good quality! Thank you! It's so cool!We will buy more Ch E Diaphragm Pump Parts in the future.
Aleksejs Sinicins

Nov 25, 2019 5

High quality Ch E Diaphragm Pump Parts ! Good seller! Thank you!
Christophe Van Oost

Nov 15, 2019 5

Good Ch E Diaphragm Pump Parts . Fast shipping. Very good supplier.
"To become the stage of realizing dreams of our employees! To build a happier, much more united and far more professional team! To reach a mutual profit of our clients, suppliers, the society and ourselves for Ch E Diaphragm Pump Parts , ch&e diaphragm pump parts , Warman Pump Parts , With more and more Chinese products around the world our international business is developing rapidly and economic indicators big increase year by year. We have enough confidence to offer you both better products and service because we are more and more powerful professional and experience in domestic and international.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.