Communicate with Supplier? Supplier
Alley Wang Ms. Alley Wang
What can I do for you?
Chat Now Contact Supplier

Shijiazhuang BKDR Metallurgical Science & Technology Co.,Ltd

Double Suction Pump Specific Speed - manufacturer, factory, supplier from China

(Total 24 Products for Double Suction Pump Specific Speed)

  • High Speed Steel Rolls

    High Speed Steel Rolls

    • Brand: Zhengkun

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 2000mt/month

    • Min. Order: 1 Piece/Pieces

    High Speed Steel Rolls High Speed Steel Mill Rolls usually short as HSS Rolls the microstructure of HSS Rolls shows fine and diffuse carbide of MC and M6C embedded in the Martensite The performance of wear resistance thermal hardness and thermal fatigue resistance of HSS roll is excellent So it is widely used for...

    Contact Now

  • Indefinite Chill Double Pour Rolls

    Indefinite Chill Double Pour Rolls

    • Brand: Zhengkun

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 1000mt/month

    • Min. Order: 5 Piece/Pieces

    Alloy Indefinite Chilled Cast Iron Rolls has a long working life span Normally it s applied to intermediate and finishing stands of long products and flat products hot rolling mills Normally ICDP roll is added with chemical compositions like Cr Ni and Mo which may increase the work layer depth Thanks to the big qty of...

    Contact Now

  • Semi High Speed Steel Rolls

    Semi High Speed Steel Rolls

    • Brand: Zhengkun

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 1000mt/month

    • Min. Order: 5 Piece/Pieces

    Semi High Speed Steel Rolls Semi High Speed Steel Rolls is similar as High Speed Steel Rolls but its alloy elements of Mo V W is a little lower and its mechanical properties is lower too But it have a more competitive price than HSS Rolls These types of rolls are used for roughing stand to increase productivity...

    Contact Now

  • High Speed Steel Mill Rolls

    High Speed Steel Mill Rolls

    • Brand: Zhengkun

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 1000mt/month

    • Min. Order: 5 Piece/Pieces

    High Speed Steel Rolls High Speed Steel Rolling Rolls usually short as HSS Rolls the microstructure of HSS Rolls shows fine and diffuse carbide of MC and M6C embedded in the Martensite The performance of wear resistance thermal hardness and thermal fatigue resistance of HSS roll is excellent So it is widely used for...

    Contact Now

  • Non Clogging Slurry Pump

    Non Clogging Slurry Pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Place of Origin: Shijiazhuang,China

    • Transportation: Ocean,Land,Air

    Non clogging pump have the good passing features it can transfer the medium with the long fiber it is wildly used in the industries of paper sugar and canned food industries Especially this type pump can transfer the medium of breweires and phosphorus chemical industry As the transfer medium and the design of pumps...

    Contact Now

  • Centrifugal Slurry Pump for Copper Mining

    Centrifugal Slurry Pump for Copper Mining

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: AH

    • Place of Origin: Shijiazhuang,China

    Centrifugal Slurry Pump for Copper Mining Copper Mining Slurry Pump is used to transport slurries of corrosive or high hardness solid particles in copper mining industry This kind of slurry pump adopts double Casing Structure have high efficiency wear resistant stable performance interchangeability of parts The lining...

    Contact Now

  • Non-clogging Centrifugal Slurry Pump

    Non-clogging Centrifugal Slurry Pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Place of Origin: Shijiazhuang,China

    This type pump with CAD modern design super hydraulic performance high efficiency and lower abrasion rate can deliver sewage sea water bittern water and sludge It can apply at the situation with Non clogging requirements The excellent performance and high reliability reduce the client s daily maintaince cost The...

    Contact Now

  • Low Abrasive Slurry pump

    Low Abrasive Slurry pump

    • Min. Order: 1 Set/Sets

    • Model No.: LS series

    • Transportation: Ocean

    The Low abrasive Slurry Pump adopts packing seal impeller seal and assembly type mechanical seal to meet the requirements of different working conditions Cylinder bearing components are designed with high capacity bearings The bearings are lubricated by grease and oil to adapt to different operating conditions too...

    Contact Now

  • Forged High Speed Steel Rolls

    Forged High Speed Steel Rolls

    • Brand: Zhengkun

    • Packaging: Inner plastic film and outer corrugated sheet, in steel case

    • Supply Ability: 1000mt/month

    • Min. Order: 2 Piece/Pieces

    Fored High Speed Steel Rolls can be used as the Work Rolls of Cold Rolling Mill Its Hardness is between 88 99 and the strength of roll neck is more than 900Mpa Its popular material is W6Mo5Cr4V2 and W12Cr4V5Co6 Application Work Rolls for six high cold rolling mill and multi rolls mill If you have any questions please...

    Contact Now

  • Desulfurization slurry pump (FGD)

    Desulfurization slurry pump (FGD)

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: TL (R)

    • Place of Origin: Shijiazhuang,China

    Series of TL FGD pump is a single stage single suction horizontal centrifugal pump It is mainly used as the circulating pump for absorbent tower in FGD appliances It has such features wide range flowing capacity high efficiency high saving power TL series pump is matched by tight structure X bracket which can save...

    Contact Now

  • Submersible Slurry Pump (SPR)

    Submersible Slurry Pump (SPR)

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: SPR

    • Place of Origin: Shijiazhuang,China

    Type SPR is elastomer protected suit for acid abrasive duty They are designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer Fully elastomer lined or hard metal fitted No submerged bearings or packing High capacity double suction design Optional...

    Contact Now

  • Submersible Centrifugal Slurry Pump

    Submersible Centrifugal Slurry Pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: SP

    • Place of Origin: Shijiazhuang,China

    Type SP pumps are vertical centrifugal slurry pumps submerged in sump to work submersible sludge pumps They are designed for delivering abrasive large particle and high density slurries submersible sludge pumps These pumps have no need of any shaft seal and sealing water They can also be operated normally for...

    Contact Now

  • Sand and gravel slurry pump

    Sand and gravel slurry pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: 8/6E-G

    • Place of Origin: Shijiazhuang,China

    Sand and gravel slurry pump mainly used in dredger dredging river channel mining and metal smelting blasting slag transportation etc Sand and gravel slurry pump Uses a single pump shell structure to connect the cassette the flow passage is spacious lined with hard alloy has good wear resistance corrosion resistance...

    Contact Now

  • Sand Suction Centrifugal Slurry Pump

    Sand Suction Centrifugal Slurry Pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: G (GH)

    • Place of Origin: Shijiazhuang,China

    Our sand suction pump is famous in China as the gold sand suction which use for the gold mining As this type pump continuous transfer the strong abrasive slurry it s work service life is short than other type pumps These pumps are construced of a single casing connected by means of clamps and a widened suction port it...

    Contact Now

  • High Head slurry pump

    High Head slurry pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Place of Origin: Shijiazhuang,China

    • Transportation: Ocean,Land

    High head centrifugal slurry pump mainly used for transfer middle level and low abrasive slurry this kind of type have a very high head can meet the requirement of long distance transportation HH Slurry pump have single case multilevel impeller horizontal version pump wet parts such as casing impeller liner plate in...

    Contact Now

  • Mechanical seal for slurry pump

    Mechanical seal for slurry pump

    • Min. Order: 1 Bag/Bags

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: Mechanical seal

    • Place of Origin: Shijiazhuang,China

    Mechanical seal It also be used for the application where leakage is not allowed The mechanical need the water cooler system to reduce the temperature during the working to protect the seal parts Meanwhile the mechanical seal the need the clear water as the washing water to take the dirty away to reduce the friction...

    Contact Now

  • Sand Dredge Centrifugal Slurry Pump

    Sand Dredge Centrifugal Slurry Pump

    • Min. Order: 1 Bag/Bags

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: G (GH)

    • Place of Origin: Shijiazhuang,China

    The sand and gravel slurry pump suit for dredging project Good design of impeller make the gravel pumps can transfer the high temperature slurry This type slurry pump is well know by the client as sand gravel pump or cerntrifugal gravel pump Our products can compete with the warman gravel pump in the field of property...

    Contact Now

  • gravel suction slurry pump

    gravel suction slurry pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: G (GH)

    • Place of Origin: Shijiazhuang,China

    Our gravel suction pump suit for dredging project Good design of impeller make the gravel pumps can transfer the high temperature slurry This type slurry pump is well know by the client as sand pump or gravel pump Our products can compete with the warman gravel pump in the field of property can price Wet parts such as...

    Contact Now

  • Sand pump for gold mining

    Sand pump for gold mining

    • Min. Order: 1 Set/Sets

    • Model No.: G

    • Transportation: Ocean,Land

    We special design and manufacture this type sand pump for gold mining as the sand have the big abrasion property the common slurry pump s service life is very short it will affect the work efficency of suck sand of gold mining This type of sand pump at begining be test by the gold mining owner and it solve the problem...

    Contact Now

  • HSR FGD slurry pump

    HSR FGD slurry pump

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: HSR

    • Place of Origin: Shijiazhuang,China

    Type HS HSR pumps widely used in electricity heating chemical industry steel coking etc of the flue gas desulfurization and desulfurization unit peripheral pump this series of products with advanced technology high efficiency and energy saving the characteristics of reasonable structure convenient maintenance the FGD...

    Contact Now

  • Slurry pump sheath rear

    Slurry pump sheath rear

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: AH;M;L

    • Place of Origin: Shijiazhuang,China

    The metal Sheath rear and front for the slurry pumps It is interchangeable for AH M L type slurry pump designed by the advanced CFD flowing simulating analysis techniques to ensure its design reliable and working effective made of stainless steel material A49 etc We can OEM or manufacture the sheath or other wet parts...

    Contact Now

  • Stainless  slurry pump sheath

    Stainless slurry pump sheath

    • Min. Order: 1 Set/Sets

    • Certificate: GB/T 19001-2008 idt ISO9001:2008

    • Model No.: AH;M;L

    • Place of Origin: Shijiazhuang,China

    We aimed to provide value and reliability for our customers We are one to supply replacement parts to the pumps high quality with lower price could help you save total running cost 100 dimensionally INTERCHANGEABLE NO need to change your stocks or pump Wet parts are damageable parts of slurry pump that often need to...

    Contact Now

  • submersible pump for drilling or water treatment

    submersible pump for drilling or water treatment

    • Brand: BKDR

    • Packaging: adapt to sea shipment

    • Supply Ability: 1,000pcs/m

    • Min. Order: 1-10 Piece/Pieces

    Type SP is all metal material suit for abrasive duty Wet parts of type SP pump are made of abrasion resistant metal which is suited for the working condition of deeper level The guide bearing construction is added to the pump on the basis of the standard pump so the pump is with both more steady operation and wider...

    Contact Now

  • Low abbrasive ZJ Series Slurry Pumps

    Low abbrasive ZJ Series Slurry Pumps

    • Brand: Shengbo

    • Packaging: In Wooden Case adapt to sea shipment

    • Supply Ability: 100sets/month

    • Min. Order: 1-10 Set/Sets

    Low Abrasive Slurry Pump mainly used for transfering low density and low abrasive slurries for example Oxide skin in the steel plant coal ash water lime slurry waste water sludge etc The Low Abrasive slurry Pump adopts changeable liner can use abrasivemetal liner as well as rubber liner The impeller can also use...

    Contact Now

Review

Eric Boutros

Oct 20, 2019 5

Good manufacturer. The price is also reasonable.Looking forward to next cooperation with Shijiazhuang BKDR Metallurgical Science & Technology Co.,Ltd company!
Mr.mr.altaf Rehman

Oct 14, 2019 4

Fast shipping. Well-made Double Suction Pump Specific Speed .Highly recommend!
Miguel A. Rosa

Oct 08, 2019 5

Thank you!It’s a pleasure to cooperate with you!Definitely will purchase Double Suction Pump Specific Speed again!
To meet the customers' over-expected satisfaction , we have our strong team to provide our best overall service which includes marketing, sales, designing, production, quality controlling, packing, warehousing and logistics for Double Suction Pump Specific Speed , double suction pump specific speed , Double Suction Slurry Pump , to achieve a win-win situation and common prosperity.
Our company has been focusing on brand strategy. Customers' satisfaction is our best advertising. We also supply OEM service for Double Suction Pump Specific Speed , double suction pump specific speed , Double Suction Slurry Pump , We will wholeheartedly welcome all clients in the industry both at home and abroad to cooperate hand in hand and create a bright future together.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.